Quote:
Originally Posted by 05_coupe
i think im missing something really simple but im not sure what, this is what ive done i started with a brand new receiver took it out of the box, hooked it up, downloaded the most recent bin file needed (2008-10-15 v1.92) let it reboot, put in serial # of receiver. then it rebooted (i believe). then i went into channel settings and set it on auto channel scan and when it asks FTA channels only i said no. i didnt touch any other settings in the menus. Is there any i should change in the menus? or anything im missing im so new to this thing and im just not getting a grasp on it
|
I also bought a cw 700s usb. Works great i was reading up in this site and was able to get her up and running in no time,, thanks Guys
I found this info very helpfull to tune your sats that is if your on DN 110,,119,, I also have the 500+ dish and the dp lnb
SATELLITE............Echo 8,10 110W
LNB POWER.........On
LNB TYPE.............Standard (OCS-DP if using DP LNBs)
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12224
DISEqC1.0..............Port 2
MOTOR..................Off
LEGACY SW..........None
SATELLITE............Echo 7 119W
LNB POWER.........On
LNB TYPE.............Standard (OCS-DP if using DP LNBs)
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12239
DISEqC1.0..............Port 1
MOTOR..................Off
LEGACY SW..........None
Great site by the way
Thanks
