[paintslinger57]

ok i reset the factory settings and redid the settings from the pansat that works then reloaded the bin file and still nothing should have loaded the bin file then did the settings signal strength is still good and i leave it on a channel for 20 minutes and all i get is scrambled or bad channel but here are my settings in case something is wrong
antena setup
echo 7
tuner setup....... 1 and 2
lnb type......standard
lnb frequency........11250
22khz...............off
diseqc...........#3
legacy s\w........ none
lnb power...........on
positioner setting.........usals 119.0
sat scan... ...all

user setup
tp auto update........off
tv type.....................ntsc

system setup
s\w transfer.........sw code

auto roll is onn

anything else i need to post let me know i cant figure out why it wont work when i put the bin file on the hardrive i just take it out and connect it to my pc then drag the file into firmware then put it back in the box and load it by going to hdd interface and updae softwre am i loading it correctly? thanks again for all the help
user setup