The right port the cable goes in is on one of the bottom 4 ports on the DP34.
Use Connecton Type: Seperate in your settings.
Now on setting up your receiver, you need to do this ...
I would Factory Default with the remote first.
Download and unzip and copy these files to your USB drive.
This one first -->
Sonicview SV-360 Premier Bin File V0119P - Must Be Loaded To All New Premiers
This one second -->
Sonicview SV-360 Premier Sat File
This one third -->
Latest Fix New Bin File SV360Premier_V0175P_CharlieBlackoutFIXED_01-08-09
Load them into your receiver in the order given above.
Also Factory Default with the remote from the Menu in between each file you load.
Then your settings should be correct above.
You can follow this -->
Sonicview SV-360 Premier Perfect Scan Method
I would not worry about Anik F3 as all those channels are scrambled now.
I can help you setup and scan that satellite at a later date.
__________________
If this site has helped in any way, please help out and click on the Donate graphic provided below
The reason we are asking is because we are a small site just starting out and all expenses are out of pocket. In order to maintain and keep the site running it costs lots of money for server costs, maintenance, etc. It's more than one can be obligated to pay and we hope you can find it in your hearts to help support this site so we can continue to give you great support.