[woodcreeker]

Change Converted Ariza 700 Back To Original Ariza 700 (JTAG and Easy)

This is for all those people who have converted the Ariza 700 to the Pansat 2700 using jtag and would like to bring it back to the ariza 700 because they're experiencing problems. This is also for those who have dead Ariza 700 boxes that need jtagging. This is a more simplified version compared to the others. This does not use jkeys or wall. Much simpler than that.

1) Connect your jtag to the ariza 700. u have to open up ur ariza box and you will see a 20pin header.
2) Open up the skymax_up2.2.exe program provided. Windows Vista users make sure u do the following: right click on the file and go to properties. under the compatability choose Windows XP service pack 2 and check the run this program under administrator.
3) Once the program is open choose your LPT port usually LPT1. and the adr flash setting choose 2MB(7FE00000). Power up your box. Wait like 30 secs. You should see nothing on the front of the box, no lights.
4) Click the start button on the skymax_up2.2 program.
5) It should connect to your box via jtag and say successful.
6) Once connected under flash operations click the erase button. Once erasing is successful repeat this procedure another 5 or few times. I usually do it 6 times to ensure complete erase.
7) Once erasing is complete under flash operations click the write button. A pop up box will appear and will ask u to browse. The default file type will show .rom. make sure you choose all file types and then browse to find the file provided: ARIZA_700_FACTORY.bin and then click okay.
8) The program will start writing to the flash on the ariza 700..wait till the flashing is complete and once the flashing is complete turn the box off from the back.
9) For those who want to update the latest autorolling bin down the latest mingo released bin which would be in the files section.
10) Use the ariza loader provided in this package and browse to the latest bin you downloaded. make sure u have ur serial null modem connected.
11) Turn the box on..on the first sign of the "-" light click flash and flash the latest bin.
12) Once complete turn the box off. Connect the box to the lnbs and tv. Rescan the channels. Let the autoroll load and you will be watching tv.