[haddad287]

c/p Frankott

UPLOAD FROM STB TO COMPUTER
First you need to use the loader to get & save the channels to the computer.
Start loader 1.06P. Select a COM PORT then in OPTIONS select UPLOAD DATA. Then use a Null cable between STB & computer. Have STB ON in the back and have the POWER button in the front OFF to transferring channels back and forth. Then click START on the loader and the % bar should start. You will get -END when STB is done. Turn STB OFF & ON from the back to clear it. You will need to locate the channel file you just uploaded so you will know where it is. Start Channel Master and click on FILE, IMPORT, then CAPTIVEWORKS CW-600S. The channels should come up in CM where you can work & save it. To save the channels click on FILE, EXPORT, then CAPTIVEWORKS CW-600S.

DOWNLOAD FROM COMPUTER TO STB.
You can do this over the channel list you already have in the STB , it will replace it. Start loader 1.06 and set com port then in OPTIONS click DOWNLOAD DATA. Click on FILE folder and put your new channel list in it that does not end in CMPROJ, it must end in SDX. Have a NULL cable from your STB to your computer. Turn STB ON in back & OFF in front. Click START on loader and the % bar should start. You will get -END when STB is done, give it extra time. Turn STB OFF & ON from the back to clear it. You may need to PATCH ENABLE - SET DEFAULT KEY when done flashing with the channels. If you mess up or things don't go well. Do a PATCH ENABLE - SET DEFAULT KEY then set ALL your Satellite settings and do it over again. If you want to keep the channels in the order of when you put them in the STB then MENU, CHANNEL MANAGER, SORT CHANNLES, ORIGINAL CHANNEL LIST. If it is not there then the list is already in the Original list.