How To Save Channel List and Settings On USB Captiveworks CW-800S PVR Help Guide

[woodcreeker]

How To Save Channel List and Settings On USB Captiveworks CW-800S PVR Help Guide

Saving your channel list and settings CW800 CW800S PVR

Once you have everything is up and running and you have everything set the way you want, you can save the channel list and settings to the USB stick or to the receiver itself.

This saves re-configuring and re-scanning each time there's a new bin, and you choose to factory default or if you need to load the factory bin for some reason.


To Save To Receiver

Press Menu
Select System Settings, Ok
Select User Channel List, Ok.
Select Save, Ok.
Select Yes, Ok.
Enter your name, or what ever you like, then press the Red button on the remote marked Audio.
Press Exit until you get back to watching TV.

To Load From Receiver

Press Menu
Select System Settings, ok
Select User Channel List, ok.
Select Load, ok.
Hi light you name you saved under.
Select, ok.
Say (YES)
Exit


To Save On USB Drive

Put thumb drive in USB port.
Press USB menu.
Press (FAV) button to upload.
Select (YES) and press O.K.
Exit
Also you can upload this to your PC for safe keeping.

To Load From USB Drive

Put thumb drive in USB port.
Press USB menu.
High lite the Captive Works database file and press O.K.
Change to (YES) and press O.K.
When loaded press Exit.
Then Press Menu
Select System Settings, ok
Select User Channel List, ok.
Select Save, ok.
Select Yes, ok.
Enter your name, or what ever you like, then press the Red button on the remote marked Audio.
Press Exit until you get back to watching TV.


This can also be used to clone another box.

If you saved the data to your PC you can email it to help out a friend in need... The friend would have to change his or her antenna settings if different ... And would also be using your channel list....