[Ladybbird]

How To Set Up the Captiveworks Ultima

Once you have your captiveworks ultima all hooked up it sets up just like the 700 and 800. It might be noticeable that when you load the latest bin and scan echo 110 that it has good signal and good quality and once the scan was started it would lose all signal and quality, so to fix this you should load each bin from the very first bin all the way to the latest bin and after that it should scan and not lose the signal or quality. Be sure you press F1 000 to Enable Patch.

Here is How to Load Bin to the CW Ultima


1 - Download/Unzip files. transfer files onto USB stick then plug it into the box. You should see a message that says
USB ready

2 - Now press the USB button on remote, highlight the files that you want to use, hit OK to load it. Now you will see this message Do you want to update software/database? Hit YES

3 After its done, it will ask you Do you want to reboot your receiver?
Hit YES

How to setup your dish setting and Scan

1 Menu, Installation, Antenna setting
2 Select your Satellites
3 Change your LNB type, Diseqc Switch to match with all your hardware
4 On the bottom screen, there are four options: Auto, Network, Blindscan and Transponder scan. Select one of these option to scan it.

Final Step before you enjoy your new receiver:

After it's done with all the scanning, press Exit out of the Menu. Now Press F1 000 on the remote control to enable patch. You should see message on TV (Bottom Right) that say PATCH ENABLED. Now just wait for the keys to roll and watch TV.
Thats it, enjoy your new receiver

Here is how to play your games that come with your CW Ultima;

Insert your flash drive that came in the box with your Ultima as it has some games pre-loaded on the flash drive..

1 On remote control press menu
2 Go to games
3 Highlight games
4 Then highlight the game you want to play


.

[panchillo]

hi. ladybbird.I live in de chicago erea do you no how my satelite setins soppost de.????

[panchillo]

for my utima riciver thnk you.