[woodcreeker]

How To Recover Your Coolsat From The E-01 Error Message

Generally, you to get out of this problem, just use the loader and write the latest bin file release with the serial cable that came with the receiver.

If that doesn't work, read on, the main method is described below.

To Recover from the dreaded E-01 ERROR simply follow my RS232 loading instructions below But REPEAT step 4 and 5 TWICE before moving on down to step 6

NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !


1) Download and unzip both the latest Factory File and the latest NorW bin file release

2) Connect your receiver to your computer using your RS232 cable.

3) Open your Coolsat 7000 Loader click the file button and load the factory file into your loader

4) Timing is everything on this step ! Put your mouse over the download button and as soon as you turn the Back power switch on your receiver ON, click the download button. This process is known as a force load. If you are to slow it will NOT load and you must Repeat this step until it loads!

5) When your receiver reboots itself Or you see this ---- turn off the back switch and reconnect it to your TV then click Menu on your remote and then go to Installation screen and select SYSTEM RECOVERY and click YES to (System restore to Factory Default) when the factory reset is finished set the Language of choice and then don't forget to set your Time Zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say NO at this time ! (Do step 4 and 5 again - TWICE is best)

6)Now Repeat the First 5 steps to load the Latest Coolsat NorW bin fie release ! BUT this time say YES to Auto Detect and it will auto set your LNB type and switch settings and then scan All the satellites you are pointed at !

NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your satellite in Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !

[roger3090]

having trouble jtaging 8000