[kan1234]

I have diamond 9000 hd and using three terminal.61.5(echo star 3 frequency 12414),82 w(nimiq freq 12239)and 91 w(nimiq freq 12239) in toronto .all were working fine up to last week .but now only 61.5 is working.but 82 w no sound no picture scramble channel only,91 w only sound is working .I updated software with 128p.any guidence or help how to fix this.thanks in advance

[woodcreeker]

There is 2 things you can do. The first is to wait for a new file to fix the BEV ECM, if one is made available soon. If DN is working, you could swing the dish and get 110W and 119W instead. DN hasn't had an ECM for around 6 weeks. The only sacrifice is you will not get HD channels on DN.

[kan1234]

thanks i have to wait for new file

[kan1234]

thanks for new bin diamond 9000hd is working ok.82w and 91 w is working but 61.5 is not.But is ok all hd channels are working and some ashian through 82w.thanks

[cdo_care]

Thanks for the positive report... Just keep going... If you want to help the site. here's the link for donation.

[dkverma]

Is DN 61.5W, 110, 119 and 129 working for anyone with new bin file. I am still getting SC for this satellites. If any one is getting audio . video for any of this satellite, please let me know so that I can just try for that particular satellite. Thanks in advance.

Thanks,
D.

[kan1234]

try downloading origonal software from digiwave for 9000 hd only .and then bin file 131p.it will work.dont change manual keys.thanks

[dkverma]

As per your suggestion, I loaded original .stb file from ftadiamond.com and then loaded 128p and then 131p stb. I rescanned all channels for satellites: 110, 119 and 129 but still the same issue. Earlier I had changed the keys for Dish Network (0006) manually and this time I removed my change before applying 131p. Any suggestions are higly welcome.

Thanks,
D.

[kan1234]

i am not too much techical guy but you can try to reset your receiver at origonal setting and then install origional software from digiwave and only 131p.good luck