[ringdingbing]

will I be able to get 33" elliptical digiwave dish: 82-91-101-110-(118.7/119)-129

Location : Montreal canada
equipement: lnb bracket
118.7/119
33" elliptical



I understand that it only has 5 lnb holders slots; but I was thinking of using a piece of plastic with the same spacing between 91 and 101 and just zip tie a lnb for the 129W

I read on like 100 forums that the quality / signal strength for 82 is crap

now before I risk my life for this hobby; with a 33" elliptical dish will i be able to catch all 6 lnB's? going to be using a diesqc the emp centauri 8x1 the blue one.. not sure what the red one is about.

so if any has some input or hints tips. ?

most recommend to find 110 then skew it until (118.7-119) and 91 will fall in place.. is that the general idea?


I use the di$}{ pointer dot c0m and does seem that acurate for my 82-91 b3v setup

[MSHax]

When I was shopping for my new dish on *Bay I saw some of the craziest LNB brackets ever. 1 bracket was for holding 9 LNB on a SuperDish. (I tried to find a picture of it but since the auction's over it's gone). I've read posts and saw pictures of someone who mounted 11 LNBs to a 33" elliptical.
I've seen posts of people using Duct tape to mount LNBs.

I guess my point is; anything is can be done if you're in the mood to toy with it.