[SolidBrass]

Redneck, you never did say if it is a dishpro plus. If it is, that is exactly what I am saying. The CW800 came with a switch as well. It is still in the box. No switch needed for this type LNB. A single connection, plus making the settings as Spyder stated, should take care of business.

[redneck46747]

I thinl i got it im doing a ch scan on 119 now and getting the rest f my ch thanks fr the help

[SolidBrass]

Originally Posted by redneck46747

I thinl i got it im doing a ch scan on 119 now and getting the rest f my ch thanks fr the help

No problem. I'm glad we could help. If you still have troubles, start a new thread describing the problem. That way, you won't be accused of hijacking a thread.

Happy Viewing.

[satman99]

Originally Posted by redneck46747

I bought sonicview 360 it came with a spliter that has 4 connections for lnb 1,2,3,4 than one to reciever. I have it set up on the eyes 110 to lnb 1 and 119 to lnb 2 so you saying unhook 110 completly and leave 119 hooked up to port 1

The switch you got with your stb is used to combine the two seperate satellites you are hitting with your two lnbs. You will hook 119 to port 1. You will hook 110 to port 2. When scanning the sats into your stb, you will scan in the same manner you hooked them to the switch. 119 will be switch 1, & 110 will be switch 2. The lnb selection will be single or universal lnb for both sats. It depends which stb you have to make the selection for the lnbs. If you have a selection for single, use that, if no single selection, use universal.

[redneck46747]

I am having problems still my lnb has 3 ports on it still cant get 119 I have a dish 500 also have a lnb with 2 ports which one should I use and where should my lines be hooked up im useing the 3 right now hooked up both on the 2 that are tgether. is that right its a plus