Which DN sats are in use

[jimmyzmac]

Hi All:
I have been testing a Viewsat VSPRO for 8 months woth no problems, and since migrations have occurred, The satellites I see in the list are:

Ciel2 (did this replace Echostar 5?)
Echostar 4/8 at 77 degrees
Echostar 10/11 at 110 degrees
Echostar 7 at 119 degrees

119 tunes everything just fine.

I lost several channels on my last scan on 110, and some people say I should scan Echostar 8/10, but they are in 2 different groups (4/8 and 10/11). When scanning 110, TP 12224 picks up nothing, but the other TP's are good.
I even tried using port 2 for both of the above Echostar sats, but this may cause conflict? I did get the channels into the map this way, but all of the ones on E 4/8 are autorolling.

Any solutions?

[SweetPete]

Ciel2 is 129 replaced echo5 echo 4-8 is n3 , echo 10-11 is 110w and echo 7 is 119
if you are not picking up 12224 then you have to teak your dish a bit to get some q on 12224 , 12224 is the default t-p for echo 10-11 10-11 replaces echo 8-10