Transponder's to use for setup

[bel71281]

c/p

Transponder's to use for setup.
Use; TP 12253 For 91
TP 12224 For 110
TP 12239 For 119

This is alright for tuning or dish alignment if you are using a Legacy LNB.
However, if you are using a DP LNB whether it be a Twin/Quad or Dual, you will never see any Signal Quality on that TP because DP LNBs Do Not use the Horizontal TPs but rather use a scheme called Bandstacking which converts the Horizontal Frequencies to Vertical ones (25600 - H TP frequency = New Vertical Frequency).
In order to see any Signal Quality while attempting to align 119 using a DP LNB you must change the transponder.
Scroll down to the Transponder setting, and scroll right/left to change the transponder to12370/V/20000/5/6.
This is the first Vertical CONUS TP which will give you Signal Quality no matter where you are located or what type of LNB you are using.
When you have aimed the dish correctly, a banner will appear above the signal level and quality bars showing the name of the satellite you're aimed at.