[woodcreeker]

Convert Fortec Lifetime Ultra FLU Into Pansat 2700 No JTAG - Easy

Follow these instructions exactly and it works, works perfect.

Fortec Lifetime Ultra to Pansat 2700A - NO Jtag required

Here is the loader you can use for the 2500-2700. Forget about using 2 different loaders or Jtagging. This will do both the boot and bin writes. I attached the b75 boot file and 208 bin with the Fortec Uploader 4.0

Use the same cable you always have used to do your reciever and it doesn't matter if your reciever is already converted to 2700 or still using the pansat 2500 bin it works the same way for both.

Open up boot file in loader and check off boot on loader and choose your correct model.

Turn receiver ON wait for it to fully boot up then click download.
When complete you will get b - 7 5 rolling across receiver front panel. Leave reciever ON and load the 208 bin in loader and change loader to flash and click download.

Wait for it to complete then b - 7 5 will roll across screen twice it will hang on 5 for about 30 secs then turn ON.

Wait 10 seconds, then Power OFF, then power ON again and write the latest Jvvh bin file.

Hook up to TV and satellite cable, put in your antenna settings and scan your sats and thats it.

b75_m.bin is the boot, jvvh_208_1.bin, is the flash, also attached is the FortecStarSTB Loader into this zip file.