going crazy

[sugarcane]

I HAVE BEEN TO EVERY FTA SIGHT THAT I COULD FIND AND NO ONE HAS BEEN ABLE TO HELP ME. I HAVE AN SV360PREMIER.
I CANNOT SEEM TO DOWNLOAD THE FILES. I GET 30% THROUGH AND IT STOPS AND SAYS DOWNLOAD FAILED. YES, I TRIED TO DOWNLOAD THE CLEAN UP FILE AND THE CURRENT FILE. I CAN'T EVEN DO IT WITH MY FLASH DRIVE. I BELIEVE I HAVE FOLLOWED ALL THE DIRECTIONS. I DELETED THE FILES AND DOWNLOADED THEM AGAIN AND IT STILL WOULDN'T WORK.


HELP

[woodcreeker]

You need to load both the clean bin file, and the sat file.

1. Download and Unzip all files. Copy them to your USB drive. Copy both files from the clean system files package, which are the both the bin file and the sat file.

2. Insert the USB drive with the files on them into the receiver.

3. Turn OFF The receiver from the back. Hold in the Ok button on the front, and turn the receiver back ON until the USB Loading Menu appears. You then will have to use the front panel buttons to load the files.

After this, you will have to setup satellites and scan for channels. The receiver needs that done too to work.

Hope This Helps !!

[stile88]

sugarcane
i had this happen to me once sometimes i forget to erase old files on my flash drive i got to about 40 percent then it said down load failed the same thing you are experiencing then it dawned on me to free up some space.
it could be as easy as freeing up some space you may have to free up some space on computer also
also follow woodcreekers advice hope this helps
post back with your results so this may benefit other members

[zerox1]

TY!!! u solved my problem !!!