[woodcreeker]

nFusion Nova PVR Slingbox Remote IR Codes Bins

Slingbox IR Codes Bins for nFusion

Here is your bin to control your Slingbox. Use these instructions to add to your Slingbox if you have an older slingbox add in the sbav.cfg newer versions require only these steps (tested on a Slingbox Pro)

Here's the instructions again for using the .bin file with the latest incarnation of SlingPlayer...

1) Make sure you're running the latest SlingPlayer 1.4.0.206
2) Copy the .bin file into the SBAV folder in the SlingPlayer program directory
3) Fire up SlingPlayer
4) Choose from Menubar -> SlingBox -> SlingBox Directory
5) Hit -> Edit properties
6) Choose SlingBox configuration tab
7) Hot audio/Video setup to run the wizard
8) Click -> Next -until you get to Device brand
9) Choose -> Other -> Next
10) Type in the alternative code from the .bin filename, ie, S1000 (bin name is S1000_PL.bin)
11) Then run the power and channel tests it takes you through, hit Finish and close the menu windows

** I also found another bin, just change bin name to S2000_PL.bin in the setup to use the other file. See which remote bin file works best for you.