[satman99]

Haven't had this box plugged in for a while. Already been puffed with 103 convertion. Also had it working with bin 205 as this was the last time I needed to use this box. I put in the latest file 208 & I'm getting rolling puff.
Thanx, Tony

[rajiv427]

Originally Posted by satman99

Haven't had this box plugged in for a while. Already been puffed with 103 convertion. Also had it working with bin 205 as this was the last time I needed to use this box. I put in the latest file 208 & I'm getting rolling puff.
Thanx, Tony

Reload the V207 and see if it fixes the rolling issue.

[satman99]

Originally Posted by rajiv427

Reload the V207 and see if it fixes the rolling issue.

One question before I load 207, should I still be using the blacklist loader?

[rajiv427]

Originally Posted by satman99

One question before I load 207, should I still be using the blacklist loader?

Use the same loader which you usually use to do all the download.

You can also redownload the V208.The file is working good I heard.

[satman99]

Still rolling, Is there a factory file I can revert back to, to clean this up. If I revert back to a factory file from before the puff, my guess is, I would have to repuff. Is that right? Boy these old stbs can be a pain but when they are working there great.

[rajiv427]

Originally Posted by satman99

Still rolling, Is there a factory file I can revert back to, to clean this up. If I revert back to a factory file from before the puff, my guess is, I would have to repuff. Is that right? Boy these old stbs can be a pain but when they are working there great.

In that case,do the conversion again.

I have a Pansat 2500 also but I don't use it now because it's really a pain in the a$$.

[satman99]

Originally Posted by rajiv427

In that case,do the conversion again.

I have a Pansat 2500 also but I don't use it now because it's really a pain in the a$$.

Yea, but c/s is down. Need something to watch. Not much on locals. LOL
I guess I need to get a life. LOL

[satman99]

Been looking around, can't find factory file. Anybody?

[woodcreeker]

No need to write a factory file. I could let you know a file to use for that. Currently, V207 V2 is best at this time. There is also a new V211 from Nikk Mty, but I would go with V207 V2 at this time.

The keys could take 20 minutes to get them in.

Once you hit 8282 and Set default key, you have to see the Srambled or Bad Channel nag come up, followed by the channel information, over and over. When you see that over and over, then you know the Autoroll function is rolling keys in.

Now meaningful things to have set up ...

Under Menu -> User Setup

Change Time Zone to your area.
Time setting = Summer Time ON

Renumber Local CH - Have a State and City entered there

Last, hit the SAT button, select Echostar Package
Now, a box will pop up, hit Ok on any channel there

Then try to 8282 and Set default key
*Note - You may have to do this 2 or 3 times.

I generally change to channel 200 and wait.
You should see the SOBC and Info over and over.

If so, picture will return.

[satman99]

Can't do anything as far as 8282 or anything else. Still rolling puff. Waited 20 minutes and still rolling puff. Sorry, forgot to mention I just tried v 207v2.

[rajiv427]

Originally Posted by satman99

Can't do anything as far as 8282 or anything else. Still rolling puff. Waited 20 minutes and still rolling puff. Sorry, forgot to mention I just tried v 207v2.

Can you download any other file or it's not taking it anymore?

[satman99]

It's taking every file I put in, with conformation that it has finished without any interuption.

[woodcreeker]

Sounds like the LZMA conversion didn't take completely.

Check this out --> New Pansat 2500A 2500 PUFF - Ver.1.0.3 Conversion Fix File

I would run that file with the BL v1.4 loader.
Then load the V207 V2 file.

Notice you should click Download when you see the first light on the receiver display.
Some say that is how you should load all 1.0.3 PUFF LZMA files.

I can tell you it doesn't hurt anything to do that.

[rajiv427]

Did you do the conversion again?

[satman99]

Ok i'll give it a try & see what happens. Mabee all was lost from not being on for so long. Will post back. I feel like I took a stupid pill today. LOL

[satman99]

Originally Posted by woodcreeker

Sounds like the LZMA conversion didn't take completely.

Check this out --> New Pansat 2500A 2500 PUFF - Ver.1.0.3 Conversion Fix File

I would run that file with the BL v1.4 loader.
Then load the V207 V2 file.

Notice you should click Download when you see the first light on the receiver display.
Some say that is how you should load all 1.0.3 PUFF LZMA files.

I can tell you it doesn't hurt anything to do that.

W/C, I redownloaded the 103, the 207v2 file, & the 211 file, & now I'm downloading the sats. No more rolling puff. You the man.

[satman99]

Took about 10 hours of tinkering, but I got it working. Now watch, c/s files will come out shortly.

[satman99]

Does anyboby know how this box can be sorted by sid? Or can't this action be done on this box?

[rajiv427]

Originally Posted by satman99

Does anyboby know how this box can be sorted by sid? Or can't this action be done on this box?

I don't think you can do it with this box.

You can select Echo Package in your Sat list,that way the channel will come up in SID.