[lyng2008]

Have any brother know with bin file for Pansat 3500SD workimg.I did try X-05BL_081111_V303_api_nocard_F_Emu it not work. please help
Thanks all

[woodcreeker]

Are you testing BEV ??

Read This -> About The Nagra3 Nag3 N3 Switch To The New Encryption

[johnwrongsome]

Having problems with V303? 411 has been working for me for the time being but also, to get V303 working, do this (from a friend )

1. Do a Factory Reset.

2. Go to Menu- Installation-Antenna setup.

3. Find Echo8.1/Ku and check it. Do the same for Echo7/Ku.

4. Now exit and go into SAT Edit/TP and rename your Echo8.1/Ku to ECHO 110 and rename Echo7/Ku to ECHO 119. (the space between ECHO and 110 is important!)

3. Do a SAT scan on each sat, ECHO 110 & ECHO 119. (Takes At least 10 min per sat)

NOTE: STB may get "hung up" during a sat scan, (over 10 min on same TP) if so, stop scanning, exit out and go into "Channel Edit" and delete the partially loaded channel list for that SAT ONLY,(this will prevent duplication of those channels) rescan to 100%, all will be ok.

4. When scanning is complete, exit out to watch TV, push SAT button on remote, you will now have a choice you have not previously had "ECHOSTAR PACKAGE or Edit-sort TP channalsis close to what we had before.

5. Select ECHOSTAR PACKAGE and select any channel. This will convert EPG Button to ECHOSTAR PACKAGE and your epg will match D**H Network channels. ( provided you are pointed properly at 110 and 119)

After doing this, you will see there is no need to load a channel list and epg works fast on most channels, slow to come up on others.
Note: You can always "refresh" your epg by simply turning your STB ON & OFF with the remote. Also, make sure your time zone, time, date and year are correct in User Setup.