[GATORBAIT_2009]

Just Checking to see if my 3500 was down or Key change.

Thanks for your Help.

[woodcreeker]

The Pansats are having slight Autoroll problems.

Hit 8282 like changing a channel.
This is a shortcut to the CAS menu or otherwise called the Key menu.
Go down to Set default key and hit Ok.

Exit out and see if the screen toggles between the SOBC screen and Channel Info screen.

If it does not, you have to Set default key again until it does.
Once the receiver is doing this, leave it alone, and a picture should return.
It looks weird, like the receiver is "rebooting" but it is now rolling in the new keys.

Hope This Helps !!

[Priestmill]

Keys did change give it a while, it will update the key area.

[j2k99]

i believe, correct me if i'm wrong, but is pansat down?

thanks

[Roswell]

Originally Posted by j2k99

i believe, correct me if i'm wrong, but is pansat down?

thanks

Pansat 2500 conv. is up and working fine here, try woodcreekers suggestions in post #2 of this thread, see if that helps..

[j2k99]

Originally Posted by Roswell

Pansat 2500 conv. is up and working fine here, try woodcreekers suggestions in post #2 of this thread, see if that helps..

hi. would this be applicable for the 3500?

[boboisno1]

I'm not sure if the 3500 has the set default key option or not, but if you have channel 200 leave it on that channel or any other if you don't have 200 for 20 minutes sometimes longer, and just wait.

Originally Posted by j2k99

hi. would this be applicable for the 3500?