[woodcreeker]

ProgDVB Elecard Edition v4.85.3 Full

ProgDVB is the best software for watching digital TV and radio channels.

Supports DVB-S (satellite), DVB-S2, DVB-C (cable), DVB-T (Terrestrial), IPTV sources or file playback.

Main functions:
:: Timeshift
:: Record TV and radio channels.
:: Broadcast channels to network.
:: Support EPG, Teletext, subtitles,…
:: Support CAM Interface for pay channels.
:: Support High Definition TV (include H.264/AVC but request Elecard edition)
:: Localization of the interface
:: Advanced OSD and remote control support (from 5.x version)
:: Skins for OSD and GUI (from 5.x version)

At the present moment this works on DVB-S,DVB-S2,DVB-T and DVB-C cards these manufactures:
:: Anysee (E30S Plus,...)
:: AverMedia DVB-S
:: Azurewave (TwinHan) (VP-1027, VP-1034, VP-1041,... ).
:: BroadLogic 2030/1030
:: Compro VideoMate DVB-S
:: DVBWorld USB2.0 DVB-S/DVBWorldDTV(PCI-Sat), Acorp TV878DS/DS110/DS120, Nextorm NBS240/NSC120
:: GeniaTech products(Digistar DVB-S PCI, satbox, TVStar, Digistar2, Digiwave 103G,...)
:: Hauppauge
:: Kworld DVB-S 100 compatible (Vstream, Dynavision..... )
:: LifeView FlyDVB
:: Netcast DVB
:: NEWMI Advanced DVB
:: Pinnacle.
:: Technotrend
:: TBS Q-Box
:: Technisat Sky Star 2 and Sky Star 3 USB or PCI
:: Telemann Skymedia 300 DVB (not official)
:: Tongshi
:: St@rKey usb box
:: Cards with BDA driver (With some cards problems are possible)
:: Besides work in absence of a card is possible, for example for viewing video of files or as the broadcast client

Software and Hardware requirements.

ProgDVB was written for x86 systems - this software only works for these Operating Systems:
Windows Vista / Windows XP / Windows 2000

for Windows 98/SE/ME (request special version of ProgDVB)

Software which you will need installed before using ProgDVB
DirectX v.8.0 or higher.
Mpeg2 video DirectShow codec (Installer of ProgDVB include Elecard shareware codes)
H.264/AVC codec if you like DVB-S2 or HD channels.

To work with ProgDVB your PC must have enough of the below hardware resources.

Mininum requirements for your PC hardware is:
Intel Pentium III Processor 500 Mhz or better for SD channels.
Intel Pentium 4 Processor 4.0 ghz or better for HD channels.
256 MB memory on board.
10 MB of disc space (Size of disk space is minimum without Video & Audio Recording).
SVGA Videocard Adapter with 32 MB memory on board.
SoundBlaster compatible sound card.
Network adapter 100 MB/Sec for broadcast

And, of course, you will need ProgDVB compatible DVB cards and a Satellite Dish installed and pointed to the current satellites for your DVB-S or DVB-S2 PCI card.