iHub CHAT and HELP discussions

[beekermc]

Try a factory reset, see if it shows up.

[Harvick]

Originally Posted by beekermc

Try a factory reset, see if it shows up.

Nothing

[beekermc]

Load this:

iHub Factory Firmware 360 Elite

Then reload 209, see if it shows up.

[Harvick]

Originally Posted by beekermc

Load this:

iHub Factory Firmware 360 Elite

Then reload 209, see if it shows up.

I'll try it if not, I'll order the fights and deal with it later. Enjoy ur evening and Thank You

[Harvick]

Nothing at all after trying everything. Maybe I should take the box back, could be defective?

[beekermc]

Well Harvick I am starting to think there may be something wrong with that box or iHub. If you walked into a store maybe see if you can try a different iHub. Don't mention anything about flashing the ihub or putting ANY software on the receiver. Just ask if you can try a different iHub because yours isn't working, it should be 1.4 right out of the box.

If that doesn't fix it and you have to bring the receiver back later you'll have to put factory firmware onto it or else they'll figure it out and probably won't replace it.

However, maybe wait until tomorrow to do that I'm going to plug in my elite and see if maybe I'm missing something. I'll let you know if I find anything.

[Harvick]

Originally Posted by beekermc

Well Harvick I am starting to think there may be something wrong with that box or iHub. If you walked into a store maybe see if you can try a different iHub. Don't mention anything about flashing the ihub or putting ANY software on the receiver. Just ask if you can try a different iHub because yours isn't working, it should be 1.4 right out of the box.

If that doesn't fix it and you have to bring the receiver back later you'll have to put factory firmware onto it or else they'll figure it out and probably won't replace it.

However, maybe wait until tomorrow to do that I'm going to plug in my elite and see if maybe I'm missing something. I'll let you know if I find anything.

OK, Thank You

[Harvick]

Took the box & ihub back and they were both defective. Got my new one and its running.
Thank You

[beekermc]

Great news!! Glad to hear you got it working!

[Desertbuster]

Hey Beeker . you still got it!!!!!

We are all going to miss you something terrible.

[hondaman900]

Originally Posted by Desertbuster

Hey Beeker . you still got it!!!!!

We are all going to miss you something terrible.

What!? Beeker's leaving us? Please say it isn't so

[beekermc]

I'm not leaving, just cutting back on the amount of time I will be able to help out due to work. I'll be here as long as AAAFTA is running, I just won't be able to spend hours helping others. The good news is that I've pretty much written down everything I know in this and other threads. So if people know what to look for they can find all the answers I can provide.

[mesatfl]

Dn is down today. is the server up?

[mesatfl]

its back now. thanks anyways..

[Desertbuster]

Beeker need help, did everything as was supposed, now the receiver says error when reboot and cannot get the computer to share. I had 1.9 on the wiz net now nothing.

[Desertbuster]

Spyder I see you are there any chance you could give a hand with this problem, I know you are able. please!!!!

[Desertbuster]

re downloaded v0219 still saying error after booting, but now it is shareing. wiznet still nothing

[spyder123]

Reboot your receiver and press power button on remote to see if you can get rid of the error. Might have to play with it a bit switching off and back on. make sure the ihub is connected properly to the receiver, maybe reboot computer to get wiznet working also. close wiznet and open it again click on search until you get it to populate.