SV iHUB Version 82.0 Error Fix

[cisco123]

iHub version 82.0 error fix.

c/p
If you have tried to update your ihub and froze during the process you get version 82.0 in the version box.

1) With the same ihub loader on the third tab. ZERO everything out.

2) do not change anything on the second tab.

3) on the first tab. Check your local ip address. When 82 error occurs it will add a 1 or a number to your local ip address.

Mine was 192.168.11.89 corrected is 192.168.1.89
SECOND LINE will be 255.255.255.0
THIRD LINE was 192.168.11.254 and was corrected 192.168.1.254

Get the picture?! It add a ONE to my address. Yours will be different DO NOT USE MY IP ADDRESS BECAUSE THAT IS FOR MY NETWORK NOT YOURS. YOU WILL GET A ERROR MESSAGE!!

Now....

On the bottom third of this tab check USE DNS SERVER. If this is filled okay if not mine was 192.168.1.254. Matches the THIRD LINE MENTION EARLIER.

Server name is:

Code:

www.svftaiks.com

Now....

Hit the SETTINGS BUTTON on the bottom right hand corner of the screen.
This will update your settings.

Last step, if done correctly click the update button to update your ihub and select the 1.4 file you downloaded.

After it is done processing turn your receiver off and disconnect your ihub for mins and connect everything and turn on your receiver.

Wait for the adapter is connected screen to pop up and double check your ihub settings. Refer to HOW TO section for the correct settings.


REMEMBER THE IP ADDRESS USED IN THIS POST IS FOR MY NETWORK. THEY WILL NOT WORK FOR YOU. YOU WILL NEED TO CONFIGURE YOUR IHUB USING YOUR IP ADDRESSES