|
|
 |
 |
 |
12-23-2007
|
#1 (permalink) | ||||||||||||||||||||
|
New Member
Join Date: Dec 2007
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 3
|
Need Help !
hi alll,
first of all wishing everyone here have a great XMas and Happy New Years. I got the problem when i tranfer sv-1000 bin 282P and the reciever have the problem is Failse and got all number 8.8.8.8 and i couldn't tranfer anymore and won't used the remote control as well. please helped me or maybe the bin got problem and cux my reciever Dead as well. please let me know anyone how to fix it.. thank you snowboy |
||||||||||||||||||||
|
    |
||||||||||||||||||||
|
12-30-2007
|
#2 (permalink) | ||||||||||||||||||||
|
New Member
Join Date: Dec 2007
Posts: 11
Thanks: 7
Thanked 1 Time in 1 Post
Rep Power: 3
|
Re: Need Help !
try loading the factory bin into the box. It may take several attempts before it loads. Make sure you do not power your box off during any downloads. If the box is frozen, leave it turned on but unplugged. Run the factory file on your "downloader" the same you would a new file. Instead of turning the box on during downloading, plug it in. This is only nessacery if you are unable to do it the normal way. Once it takes the factory file, wait till the new bin comes out and load it over top of the factory file
|
||||||||||||||||||||
|
|
|
||||||||||||||||||||
|
12-30-2007
|
#3 (permalink) | ||||||||||||||||||||
|
Administrator
Join Date: Aug 2007
Posts: 230
Thanks: 85
Thanked 533 Times in 107 Posts
Rep Power: 10
|
Re: Need Help !
Happy New Year and I hope you had a Merry Christmas, snowboy_2004 ! ! ! !
You will have to use the loader and the factory bin file. You have to "unzip" all files first. Download the factory bin and the downloader. "Unzip" these files. You may have the wrong loader, so use the Downloader posted here on our site. Download the latest bin file and unzip that also. The latest bin file here for your receiver is 283P. Just like kaysar said above. Have power OFF on rear switch, and open the factory bin file in your loader, and click to write bin on your PC before you turn the unit on. This may take several attempts. Once that completes, write the latest bin file. You may have to force the factory bin write, by turn on the power on the rear and clciking from the PC to write the fatcory bin at the same time. Once you get the factory bin to write, wait until it reboots completely. Then power OFF and click to write the latest bin, then turn the receiver ON from the back. Wait completely until that process is finished. Setup satellites, scan channels and enjoy! Good Luck !! |
||||||||||||||||||||
|
|
|
||||||||||||||||||||
|
12-30-2007
|
#4 (permalink) | ||||||||||||||||||||
|
Super Moderator
Join Date: Aug 2007
Location: AAAFTA Forum
Posts: 9,856
Thanks: 1,296
Thanked 8,511 Times in 3,429 Posts
Rep Power: 10
|
Re: Need Help !
Posted this just for you, snowboy_2004 ! ! ! !
Man have I been behind on my Stickys...  Here is the link: Setup Guide for Sonicview SV-1000 Hope This Helps !! 
__________________
If this site has helped in any way, please help out and click on the Donate graphic below  The reason we are asking is because we are a small site and all expenses are out of pocket. In order to maintain and keep the site running it costs lots of money for server costs, maintenance, etc. It's more than one can be obligated to pay and we hope you can find it in your hearts to help support this site so we can continue to give you great support.        |
||||||||||||||||||||
|
|
||||||||||||||||||||
