[ryobie1]

I have been fumblibg around reading for an hour or so looking for the file to load. My ihub is ver1.4
My sv360e has't been messed with since the blackout.
Can some one point me to the right thread to set up my ihub for the first time on my sv360e?
Also a point in the right direction for the file download?
A good "how to" would be great!

[Roswell]

Hi Ryobi, have you read through all these post? I think there is a lot of good help here... Hope this helps..


http://www.aaafta.com/forum/sonicview-ihub-dongle-help/

[jjk326]

Originally Posted by ryobie1

I have been fumblibg around reading for an hour or so looking for the file to load. My ihub is ver1.4
My sv360e has't been messed with since the blackout.
Can some one point me to the right thread to set up my ihub for the first time on my sv360e?
Also a point in the right direction for the file download?
A good "how to" would be great!

As your reciever is 1.4 ready, load bin 209 july 9 elite with pendrive, wait reboot, go to ipcong and set the ip as :
sett. type ... static

local port ...80
use DSN yes
server port...1920
serial # ...your i-hub # ( reenforced acurancy)
after this fo back to setting type and change to DHCP , and hit apply in the
bottom of the screen, subnet ,gateway,DNS ip will be set automaticly,
gateway and DNS IP are the same. Go to channel 2oo and wait. if every thing is ok will open.

[willy]

I just ordered an IHUB 1.4 version, and it should be here in a few days. So as i understand this i just load this 462 beta file to the 8000 via usb thumb drive. Just like loading a bin file. So I dont have to mess with wiznet seeing its a 1.4 version. Its pretty much load(462 beta), boot, connect(IHUB), and play(channel 200). I,v been reading so many versions on how to get this thing going Its kind of confussing.
Thanks in advance for any help.
Willy

[willy]

Never mind guys and gals. I just recieved it and figured it out. Thanks to buddyjh printable instructions. This thing rocks.

[spyder123]

Glad your enjoying it, one of the very few who haven't been complaining about it.

Originally Posted by willy

Never mind guys and gals. I just recieved it and figured it out. Thanks to buddyjh printable instructions. This thing rocks.

[ryobie1]

Originally Posted by Roswell

Hi Ryobi, have you read through all these post? I think there is a lot of good help here... Hope this helps..


http://www.aaafta.com/forum/sonicview-ihub-dongle-help/

Thank you. That is exactly what I was looking for. I have no idea why I couldn't find it before. Maybe I was color shock from haloween.

My dongle should be here wed. or thur. From what I read it will either work right away and be no trouble or I'm going to pull out hair.

Thanx again.

[ryobie1]

I have the ihub hooked up. I am only able to test channel 100 and nothing more.
Any ideas?

[ryobie1]

I am also getting 490

[ryobie1]

could this be settings?

[ryobie1]

okay So it apears that I get those channels with out the ihub plugged in.
I have definetly done something wrong

[beekermc]

Hello ryobie, what bin do you have loaded?

This is the one you need here:

Sv Elite 209 Ihub Beta (Must read Release Notes )

If you load that, plug your ihub into your router and then go into ip config set the setting type to dhcp (should be default anyway), Use DNS to "Yes" and enter your serial in the bottom line, you should be good to go.

[ryobie1]

I have 209 loaded.
I now am getting some channels like history and others.
Some reason I don't have all the channels. I can't even change the receiver to some channels like 300, 301, 302, 303 It just skips over them.

Thank you beeker for your help.

[beekermc]

There is only 50 encrypted channels open right now (History is one). Here's a list that is updated in real time by the SV coders:

Sonicview iHub | Currently Available Channels

They have had more channels open in the past however there was a lot of freezing. Now with less channels there is less freezing, they are working their way back up to as many as they had before but it will take time.

[ryobie1]

how can i get my receiver to go to channels that aren't on my list?
it skips over most of the channels ie i can go to channel 298 then it skipps to channel 307

[ryobie1]

I was having this problem even with the stand alone fix but there was so meny channels I didn't care.
I'm going to step it back to the basics and replace mt lnb and see if I can get thigs wirking with the correct dish settings because I never could get it right.

[ryobie1]

My current settings are:
tuner id tuner 1
sattelite echostar8.x
connection seorate
lnb type ocs-dp
lnb frequensy 11250
22khz off
lnb power on
transponder 12224
search option all
network search on
diseqc port 1
motor dissable
legasy switch off

tuner id tuner1
sattellite echostar 7
connection separate
lnb type ocs-dp
lnb frequency 11250
22khz off
lnb power on
transponder 12224
search option all
network search on
diseqc port 1
motor dissable
legasy switch off

[ryobie1]

I know this isn't right but it is the only way I can get signal and Q

[beekermc]

What kind of switch are you using?

If you have more than one LNB you will need a switch of some kind, either a disecq or a 22khz switch.

[ryobie1]

I am using the dish pro pluss dual lnb