[djs1165]

Fellas, maybe I did it in wrong order (loaded new bin file,THEN, loaded 1.9 IHUB file) But now when I try to open WIZNET, nothing shows in any of the boxes! I put in the right settings manually, and when I do SEARCH, nothing comes up. What am I doing wrong and how can I resolve this? It (WIZNET) worked the first time I went to use it. Now, after loading files, it wont run at all. * ALSO* I noticed that in my IP config on the receiver, I don't show LOCAL PORT or SERVER PORT(1920). And it takes a LONG time to load settings. I think I really messed it up--huh? Help please! THANKS!

[ryobie1]

I had this same issue.
I had to reload the old bin back into my receiver and flash the ihub to 1.9 and then update the receiver. Just so you know this goes against the official "how to" but I had the same problem you did and this is how I had to get around it.

[jjk326]

Originally Posted by djs1165

Fellas, maybe I did it in wrong order (loaded new bin file,THEN, loaded 1.9 IHUB file) But now when I try to open WIZNET, nothing shows in any of the boxes! I put in the right settings manually, and when I do SEARCH, nothing comes up. What am I doing wrong and how can I resolve this? It (WIZNET) worked the first time I went to use it. Now, after loading files, it wont run at all. * ALSO* I noticed that in my IP config on the receiver, I don't show LOCAL PORT or SERVER PORT(1920). And it takes a LONG time to load settings. I think I really messed it up--huh? Help please! THANKS!

When you load 1.9 the ipconfg change, it is not the same as before, only shows : setting type
local ip
Subnet
gateway
DNS ip
serial #
Apply
All the other is gone, they control it. Remember, 1.9 has to be loaded with wiznet it is for the i-hub, and bin is for the reciever, load it with usb. load bin first and then open wiznet and load 1.9, for me works to load bin again as third step. If any fail you can step back to 1.4 and old bin, and then start again to upgrade to 1.9. I did not use Room100 or cleansistm or factbin, just step back. since yesterday 10:00Pm server is up and down. SV360E, SV360P and SV8000.

[kan1234]

hi
mine is working but freezing a lot and channel shows up after 10-15 seconds.any idea what to do.having new 253 bin and 1.9.thanks a lot

[Desertbuster]

djs1165 I am having similar problems, curious are you able to apply ip config?

[kan1234]

i upgraded to 1.9 and then applied 253bin.it went back to 82.tried again second time and upgraded to 1.9 direct and then 253bin.it worked for me but when changing channel it takes 15 or more seconds to show up and then freezes in between.there are couple new channels there.

[kan1234]

also in wiznet domain name is 4 stars like **** i tried to change and it didnt work.it will not show any on tv

[Desertbuster]

I have an elite but was wondering if one of djs1165's problems not being able to apply the ip config., just freezes.

[Desertbuster]

I beleive you will find it is ***** five stars

[kan1234]

yes its 5 star my mistake

[Desertbuster]

Well done, at least you have managed to download 1.9. I understand its going to get better as far as the freezing is concerned.