[buddyjh]

The ShowMe-X2 is the most advanced Serial-to-Ethernet converter easy Just plug and use. The Showme X2 dongle allows any of the RS232 serial ports on your PC or FTA Receiver to interface directly to a TCP/IP network Via router or wireless bridge . The Showme X2 supports media delivery over ethernet via the serial port of your Sonysat,Spacestar,UltraStar and others FTA . Attach data collection devices - scales, barcode scanners, sensors, gages meters, RF equipment, telephone PBX systems such trixbox , laboratory instruments, etc. to the serial ports on your PC and communicate with those devices from any other workstation in the same network or across the Internet.
Lan Network - Serial Port


Compatible with :


Sonysat DGR3001,DCR5500 No Need Power supply
Sonysat DSR4000 ,DSR5000,Spacestar 500, 700 Need Power Supply
UltraStar 4000,5000 Need Power Supply
Nfusion
Coolsat
SonicView
and other receiver with network setting.

* Architecture
* TCP/IP: W5100
* PHY: Included in W5100
* Serial: RS-232
* MCU: 62K Bytes in-system programmable (ISP) Flash

* Network
* Interface: 10/100 Mbps auto-sensing RJ-45 Connector
* Protocol: TCP, UDP, IP, ARP, ICMP, MAC, PPPoE

* Serial
* Signals: TXD, RXD, RTS, CTS, GND
* Parametersata bits: 7,8 | Flow Control: RTS/CTS, XON/XOFF
* Speed: Up to 230Kbps

* Other
* Dimensions: 3in x 1.5in (PCB length x width)
* Power Consumption: DC 5V, Under 180mA
* Temperature: 0c ~ 80c (Operation), -40c ~ 85c (storage)
* Humidity: 10 ~ 90%
* Price: $59.99 - $69.99 US